The time setting widget below will allow you to set the time/date stamp on your flash drive recorder.
To use the time set widget, first plug the flash drive recorder into your PC's USB port. Next, download the Time Setup file from the link below, and save it to the main/root directory that corresponds with your flash drive recorder (such as E: or F:, depending on your computer).
Click here to save the Time Setup file (Note: The time setting file is compatible with Windows computers only).
Note: When downloading an executable file like this from the internet, your anti-virus software or browser might prompt you with a warning. Rest assured the file is completely safe to use.
To use the time set widget, plug the flash drive recorder into your PC's USB port, and save the Time Setup.exe file to the main/root directory of drive:
Once you've copied the Time Setup file to the main directory of the flash drive, double click to run, and click start:
After you click the start button, the program will create a file named date_time.cfg in the main directory of the flash drive. Close the Time Setup file, and then unplug the flash drive recorder from your computer.
After you have unplugged the flash drive recorder from your USB port, turn it on, and the recorder will read and apply the time stamp that you just set. If this process is completed successfully, the new recorded audio files will have the correct time and date stamp on them (and the date_time.cfg file will be removed).